2" & 3" Brush

This is replacement brush for one dust shoe. It measures approximately 26" in length. If multiple quantities are ordered, the brush will be sent as one continuous length. Select either 2" or 3" filament length.

Be the first to review this product

Brush Filament Length *

$35.40

Qty:

If you need to replace the nylon brush in the brush ring, you can pull it free from the hot glue used to hold it in place and then scrape the excess glue out of the slot. The replacement brush can then be glued back in place with hot glue. Alternatively, a replacement brush ring can be purchased.

Customers who bought this item also bought

STANDARD Split-Shoe

The standard shoe is provided with a 3" brush ring and a 4" threaded hose connector. This page is used to order the standard shoe and NOT THE MINI shoe. Use the back button and select the MINI shoe if that is what you need. If your router/spindle is not in the list below, send an e-mail to KentCNC@gmail.com

$159.00

MINI Split-Shoe

The Mini Split-Shoe is provided with a 2-1/2" quick connector compatible with most shop vacs. The Mini Split-Shoe is much smaller (8”x4.75”) compared to our standard shoe (10.5” x 6”). This new shoe is engineered for smaller machines and is provided with a 2-1/2” quick connector that is compatible with most shop vacs. When ordering, select either the 2" or 3" brush ring. See below to determine which brush ring you need.

$159.00

Hitachi/Metabo Exhaust Deflector

The cooling exhaust on most routers blows down and outward. The exhaust on the Hitachi blows straight down and reduces the collection efficiency. Add this to your Hitachi dust shoe to improve the collection efficiency.

$14.25